Please choose your territory and language
Benelux, Nederlandse

TM01 sizing tool

How to measure your position

In best case you already have a bike adjusted to your desired position. If not, a professional fitting expert will be able to give you the required measurements. To measure your bike, please follow the procedure described in the boxes, and then fill out the form (enter values in mm).

A) Bottom bracket height (in mm)
B) Vertical saddle height (in mm)
C) Reach (in mm)
D) Stack (in mm)
E) Seatback Position (in mm)

Error

Please fill in the missing values

0

Bike preparation

To take those measurements, first place your bike on an even, horizontal ground. You need to use a vertical edge as reference: for example a plumb-line or a pole

A

Bottom bracket height

Measure the vertical distance between the bottom bracket axle center and the ground (BBH).

*1 Bottom bracket center

B

Vertical seat height

Measure the vertical distance between the ground and the top of the saddle (VSH)

*1 Saddle top

C

Armpads reach

First measure and mark the center of your handlebar armpads.
Measure the horizontal distance from the bottom bracket to the center of the pads (RP)

*1 Vertical reference (plumb line)
*2 Center of the pad
*3 Bottom bracket center

D

Armpads stack

First measure and mark the center of your handlebar armpads.
Measure the vertical distance from the ground to the middle and upper surface of the armpads (SP).

*1 Pad top surface

E

Saddle setback

Measure the horizontal distance from the bottom bracket to the tip of your saddle (SSB). Use a vertical edge as reference. If the saddle tip is in front of the BB, then the number is negative.

*1 Saddle tip