TM01 sizing tool
How to measure your position
In best case you already have a bike adjusted to your desired position. If not, a professional fitting expert will be able to give you the required measurements. To measure your bike, please follow the procedure described in the boxes, and then fill out the form (enter values in mm).
Bike preparation
To take those measurements, first place your bike on an even, horizontal ground. You need to use a vertical edge as reference: for example a plumb-line or a pole
Bottom bracket height
Measure the vertical distance between the bottom bracket axle center and the ground (BBH).
*1 Bottom bracket center
Vertical seat height
Measure the vertical distance between the ground and the top of the saddle (VSH)
*1 Saddle top
Armpads reach
First measure and mark the center of your handlebar armpads.
Measure the horizontal distance from the bottom bracket to the center of the pads (RP)
*1 Vertical reference (plumb line)
*2 Center of the pad
*3 Bottom bracket center
Armpads stack
First measure and mark the center of your handlebar armpads.
Measure the vertical distance from the ground to the middle and upper surface of the armpads (SP).
*1 Pad top surface
Saddle setback
Measure the horizontal distance from the bottom bracket to the tip of your saddle (SSB). Use a vertical edge as reference. If the saddle tip is in front of the BB, then the number is negative.
*1 Saddle tip
